The pieces look especially nice coupled with baskets.
The Arboretum did a lovely job of hanging the exhibit.
So check it out if you are in the Pasadena area.
FOR-AY
noun
Yesterday, we took to the El Cariso Big Woods in the Cleveland National Forest with the Los Angeles Mycological Society. It was the Society's first foray for the 2008-2009 season. It was our first ever mushroom foray.
Of all the days to foray in Southern California we chose a cold and raining day. The spoils were meager but fun was had by all.
Here are photos of our spoils...

These were the inspiration for the colors of my Mondrian Over Easy hat that I recently finished and will unveil to the group on Saturday. These are flowers from a garden down the street - we walk the dogs by these flowers almost everyday. They match nicely with the conference colors.
The Conversation
The results of yesterday's dye day.
Anyway, yesterday I got to the half way point on my Mondrian inspired hat band. This morning I wove an inch or two and then decided I had to rip. I just couldn't stand a small imperfection about four inches down. It looked like I snagged one or two warp ends...remember that the warp is thread so it was a tiny, a very tiny imperfection. But boy with every pass of my shuttle the bigger and more noticeable it became.
I designed an initial cartoon as a starting point by simply putting boxes and colors where they seemed 'right' in a self made Mondrian design. I wrote about that here. Later I studied the design and decided I needed to have a better balance of the colors - no one color should stand out and I wanted it to be a bit easier to weave.
To make it easier to weave I decided to have squares the width of the band, one in each color located equally around the band. I would then put the smaller rectangles and squares along with the greater complexity between the squares.
Here is the final design in close to the size it will be once woven. The colors aren't true in the cartoon nor in the photo. It was created in excel. When I am ready to weave I will print it out larger so I can actually read each row and column since they indicate which shafts should be raised for each shuttle of colored thread. [You may notice the proportions don't look quite right...yes...I was a bit lazy. Those squares in the cartoon would have been a bit more square if I had worked on getting the rows and columns in excel to be the same size...]
Anyway, it took a while to get to this point since I took a couple of iterations to get a good balance between the three analogous colors. Mondrian tended to use a lot of white with a few other colors always separated by black. The other colors were always proportionally balanced. I figured if I was trying to converse with Mondrian, this part of the conversation should be balanced.
My first step was to figure out how much of each color I had in the design. Since I did it in excel, it was pretty easy to get. I discovered the red/orange occupied the greatest proportion of the design with the red/purple and yellow/orange having smaller and similar proportions. Whether that is a good balance depends on how visually intense each of the colors are. If they are equally intense then they should be in equal proportions and I would need to alter my design.
I used concept of balance in the Munsell Color Theory Handbook that I have been studying. It says to achieve balance you need a good balance of both chroma and value. For example, if you have two colors - one with a stronger chroma and higher value and the other with a weaker chroma and lower value, you would need to use less of the first and more of the second proportionally to achieve balance.
To determine a numerical value for the chroma and value of my three colors, I matched them to the color chips in my Color Handbook. Multiplying chroma by the value gives a representation of the overall impact of the color. I converted those to proportions and discovered that the red-purple will stand out much less than the other two colors and hence would need to occupy a greater proportion of the final piece in order for there to be a good balance.
I was again lucky. I did not have to re-do my design. All I had to do was switch the red-purple with the red/orange and the resulting proportions were in the ballpark for a good balance. A quick switch in excel, the design was done and I was ready to weave.
Now on to sampling... Here is a photo of my sample where I needed to determine how many colors and strands of thread I wanted to weave with in this piece.
I was again lucky. Using two strands of each of the five colors will yield a balanced weave and provide good coverage for the head band. Therefore, I only have to weave one pass for each row in my cartoon. This makes things so much easier.
This afternoon, I actually started weaving the headband and it looks quite astonishing. I love it. Once I have a few more inches done I will take a photo with my better camera to give you a sneak peak at the work in progress.
* You also may be wondering how the bird fits into this creation...trust me...it does...it too is quite astonishing...more later.
Yup...there is a difference. As you can see, on the bottom half, where the brown yarn is decreasing, turning on the lower warp yields a more ragged look than on the upper half of the photo where the brown yarn was increasing. Interesting.
So let's see...where two colors meet along a line...one color will be increasing and the other will be decreasing. For a smoother line, have the decreasing one always turn on the upper warps [then, of course, the increasing one will then turn on the lower warps].
Hmmm...I think I will need to really focus on this next time I am weaving a section where the concept applies. Not the easiest thing to remember.
I wonder how the line would look if I alternated each time...
It looks a bit like Mondrian but just not right. Need to work on the mix of vertical and horizontal shapes as well as the position and quantity of the colors. I do like the three colors I have initially selected to use with the white and black. I need however to be open to using the other two possible colors also. When weaving with taquete the colors tend to blend a bit with the warp color as well as whatever is adjacent.
This will be the band of the hat. It needs to be 26 inches long and will be woven in sewing thread. When considering the proportions I need to remember that the viewer will not see the entire 26 inches at once.
More later...
Here is a photo of the Ebb Tide Exhibit at Convergence in Tampa. The blue yardage with the two sailboats and START at the top is mine.
Here is a photo of the bricks from last week and today's Brick Wednesday. This is a nice project since I know I only have to weave one brick on each Wednesday...or I can do more. Last week I didn't feel like weaving. Today I was quite busy packing.
I started on the left with a half of brick in a solid twill with pink yarn. The twill goes in reverse to the one immediately below. Half way through weaving this half a brick, I had one of those 'duh' moments...those special moments when you realize the obvious. It's not that I didn't know it, it just never came to the top of my consciousness.
I never got the pictures of the two twills I did. The first is the simple twill in a hand painted mottled yarn. It's feel is fabulous...a nice repetitive bumpiness and texture. I do want to explore using twill more. It will be interesting to see how hatching will look as what I could do with dots. The pattern would be great to provide texture in a tree or landscape.
The second is a zigzag pattern where I changed the direction of the twill each third round trip. Between the mottled blue yarn and the zigzag pattern, it says 'chaos' to me. Looks like it would be wonderful to use in an scene with big waves breaking on the beach or the churning of the water underneath the wave.
Things are starting to settle down and I am warping up all my looms to start 'creating' vs. 'finishing'. It never occurred to me that getting ready for gallery exhibits would be so time consuming.
I don't want to overly plan this project since I have several other projects which are highly planned. My working title for this tapestry is 'Brick Wednesday'.I am in the midst of finishing my yardage for the Ebb Tide exhibit in Convergence. I need to send it off in May. You may recall it is a 13 foot maze which you can actually get through if you stare at it long enough and don't get lost. There are clues woven into the maze to help you along if you know your nautical flags, signage and regatta flag indicators. The clues can also distract you along the way.
For fun, I decided to weave a small solution key to go with the yardage. Like the yardage I start at the bottom...or in this case the finish.
Here are the photos of the two that are going into the Complex Weavers exhibit called Weaving in the Computer Age - from inkles to jacquard. Tarpon Springs Cultural Center, Tarpon Springs Florida June 8th-July 30, 2008.
to the exhibit in Tarpon Springs to see the versions that are hanging there.